Physical properties:

In addition to the overall heat transfer coefficient of thermal conductivity of metals depends on the metal, but also depends on other factors. In most cases, the film heat transfer coefficient, descaling and surface condition of the metal. Stainless steel surface can be maintained clean, so it is better than the thermal conductivity of the higher thermal conductivity of other metals. Liaocheng Suntory provide eight stainless steel, stainless steel plate excellent technical standard stainless steel plate corrosion resistance, bending and welding parts toughness and welding parts stamping workability of high strength stainless steel plate and its manufacturing method. Specifically, it is to contain C: 0.02% or less, N: 0.02% or less, Cr: more than 11% but less than 17%, an appropriate content of Si, Mn, P, S, Al, Ni, and satisfies 12≤Cr Mo 1.5Si≤ 17,1≤Ni 30 (CN) 0.5 (Mn Cu) ≤4, Cr 0.5 (Ni Cu) 3.3Mo≥16.0,0.006≤CN≤0.030 stainless steel plate heated to 850 ~ 1250 ℃, then subjected to 1 ℃ / s The cooling rate of the above heat treatment. Such organizations can become more than 12% volume fraction of martensite, 730MPa or more high strength, corrosion resistance and bending workability, HAZ toughness excellent high strength stainless steel plate. Reuse containing Mo, B, etc., can significantly improve the performance of welded parts stamping.

Plus oxygen gas flame can not cut stainless steel plate is because stainless steel is not easily oxidized.

5CM thick stainless steel plate processing use special cutting tools, such as:

(1) the larger wattage Laser Cutting machine (laser cutting machine)

(2) Hydraulic Saw

(3) grinding disc

(4) The person handsaw

(5) Wire Cutting machine (EDM).

(6) high-pressure water jet cutting (professional waterjet cutting: Shanghai Symphony No)

(7) Plasma arc cutting